See your RAMS draft in 60 seconds.
Pick your trade and RamsDocs creates a consultant-grade RAMS starting point using a specialist safety knowledge library. Fine-tune it live, run pre-submission checks, then export when it’s ready.
- No blank Word doc
- No long questionnaire upfront
- Built from specialist RAMS knowledge
- You review and approve before export
Plumbing & Heating · Method statement
Pipework & Soldering RAMS
Starting draft based on your trade
Risk 1–25 · likelihood × severity · controls applied for residual
- Trade-specific hazards & controls loaded
- Method sequence drafted
- PPE & competence section started
- Public / occupant segregation and barriers confirmed
- Hot works permit and fire watch confirmed
- Lifting aids / team-lift arrangements confirmed
- Named site supervisor / competent person
- Emergency & rescue arrangements confirmed
Needs site-specific confirmation before export. You review and approve as the competent person.
Preview my RAMS →Built for UK subcontractors and trades
Scaffolders, electricians, roofers, plumbers and groundworkers — the people a principal contractor asks for RAMS before a Monday start.
Preview free. Configure live. Export when ready.
No long questionnaire before you see value. See the draft, refine it live, then export when it’s ready.
Choose your trade
Pick the kind of work you do. RamsDocs loads a trade-specific RAMS starting point with common hazards, controls, PPE and method steps.
Configure it live
Tick what applies to this job — working at height, hot works, occupied site, dust, chemicals, lifting, electrical isolation. Your RAMS updates as you go.
Check and export
RamsDocs flags missing safety-critical details before export. You review, approve and download a clean RAMS PDF/DOCX when ready.
See the document first, not a form
Most RAMS tools make you fill in the whole form before you see anything. RamsDocs shows a strong first draft immediately, then asks only for the details that matter.
You won the job. Now they want the paperwork.
Every new site wants its own RAMS, and a generic copy-paste is the fastest way to get sent back. RamsDocs starts you from a proper site-specific document instead of a blank Word file.
“Spent the whole evening rewriting last job’s method statement and it still got sent back — wrong site name in two places.
“PC rejected our RAMS for ‘vague controls’. Couldn’t start Monday. Lost a day’s labour for four lads.
“Every new site wants its own RAMS. I’m a sparky, not a health & safety writer.
“We just copy-paste the last one and pray. One day it’s going to bite us.
A specialist RAMS knowledge library, not a generic AI prompt
The instant draft is not generic AI. It starts from a structured RAMS knowledge library: trade hazards, practical controls, PPE, plant, competence, emergency arrangements and method steps for common UK contractor jobs.
- 50 task templates across 9 categories
- Specific controls — not “take care” or “use PPE”
- Built around CDM 2015 and HSE guidance
RAMS
MEWP / Cherry Picker RAMS
RAMS
Electrical Installation RAMS
RAMS
Excavation RAMS
RAMS
Welding Hot Works RAMS
RAMS
Silica Dust (RCS) RAMS
RAMS
Soft Strip-out RAMS
See what’s missing before your client does
As you configure the job, RamsDocs flags the safety-critical details a principal contractor sends RAMS back for — so you fix them before you submit, not after.
- Work at height selected but access method missing
- Hot works selected but permit / fire-watch not confirmed
- COSHH trigger detected but substance controls missing
- Occupied premises selected but public segregation not included
- Site supervisor / competent person missing
- Emergency / rescue arrangements need confirmation
Statuses: Draft → Needs confirmation → Ready for review
A clean RAMS your principal contractor can review quickly
Export a structured RAMS report your principal contractor can review in minutes. Every exported RAMS includes:
- Scope, site details & method sequence
- Hazards, controls & 5×5 risk ratings
- PPE, competence & emergency arrangements
- Briefing & sign-off sheet
- Clean, branded PDF / DOCX — reopen & re-export anytime
Method Statement & Risk Assessment
Scaffold Erection & Dismantling
Site: Unit 4, Brookfield Ind. Est. · CDM 2015
£millions
Fines for serious H&S breaches under the Sentencing Council guidelines — scaled to turnover.
Days lost
A RAMS rejected by the principal contractor can stop you starting on site — labour booked, no work done.
Every site
Each new job needs its own site-specific RAMS. Generic copy-paste is the most common reason they’re rejected.
RAMS shaped around your trade
Start from the tasks your trade actually does on site. Popular with plumbing, heating, electrical and scaffolding contractors.
Plumbing & Heating
Boiler installation · Pipework & soldering · Plant room works · Bathroom installation
View Plumbing & Heating RAMS →
Electrical
Isolation & lock-off · Testing & inspection · Containment · Working at height
View Electrical RAMS →
Scaffolding
Erection sequence · Loading bay · TG20 compliance · Edge protection
View Scaffolding RAMS →
Groundworks
Excavation · Services / CAT scanning · Shoring · Plant & exclusion zones
View Groundworks RAMS →
Roofing
Working at height · Fragile surfaces · Edge protection · MEWP use
View Roofing RAMS →50 RAMS templates behind the draft
Across 9 categories of UK construction work.
Work at Height
Scaffolds, towers, MEWPs, ladders, roof work.
Electrical
Installation, live working, temporary site supplies.
Groundworks & Excavation
Excavation, trenching, confined spaces, drainage.
Lifting & Plant
Cranes, telehandlers, excavators, site transport.
Hot Works
Welding, cutting, grinding, brazing.
COSHH & Substances
Dust, cement, solvents, lead, hazardous substances.
Demolition & Strip-out
Soft strip, demolition, asbestos awareness.
Trades & Finishing
Brickwork, joinery, plastering, painting, flooring.
Site & General
Welfare setup, traffic, manual handling, lone working.
Popular templates
Scaffold Erection & Dismantling RAMS
Scaffolding · Scaffold erection
Includes hazards, controls, PPE & method.
Electrical Installation RAMS
Electrical · Electrical installation
Includes hazards, controls, PPE & method.
Excavation RAMS
Groundworks · Excavation
Includes hazards, controls, PPE & method.
Welding Hot Works RAMS
Mechanical · Welding
Includes hazards, controls, PPE & method.
Silica Dust (RCS) RAMS
General · Silica dust
Includes hazards, controls, PPE & method.
Site Setup & Welfare RAMS
Site · Site setup & welfare
Includes hazards, controls, PPE & method.
Preview free. Pay when it’s worth exporting.
Preview free. Pay when it’s worth exporting. Subscribe when you need RAMS every week.
Free preview
£0
See your RAMS before you pay.
- Choose your trade
- Instant RAMS draft
- Configure & see readiness score
- Save one draft
- Preview-only export
Single RAMS
£19/RAMS
One review-ready export, no subscription.
- Export one review-ready PDF/DOCX
- Branded document
- Pre-submission checker
- Re-export the same job if edits requested
Pro
Popular£39/mo
For repeat RAMS users.
- Unlimited / fair-use exports
- Saved company profile
- Saved clients & sites
- Reusable methods
- Your logo & branding
Team
£109/mo
For multi-user contractors.
- Everything in Pro
- Multiple users
- Shared library
- Approval workflow
- Project & site organisation
- Document history
Indicative launch pricing in GBP, excl. VAT. Don’t need a subscription? Pay for a single RAMS when you need it.
Choose your trade, see your RAMS.
Free during early access — no card required.
- Free preview — no card
- Founder-led setup for early users
- Built for UK trades and subcontractors
Start with your trade
We’re opening early access. Tell us your trade and we’ll send your trade-specific RAMS preview and setup invite.
RamsDocs helps draft structured RAMS from your job details. It does not replace competent-person review, site-specific judgement or your legal duties.
Straight answers
Will this guarantee my RAMS gets accepted?+
No — and be wary of anyone who promises that. Acceptance is the principal contractor’s decision. RamsDocs gives you a site-specific document with the hazards and controls a PC expects to see, which is designed to reduce the rework and rejections that come from generic copy-paste documents. You remain the competent person who reviews and signs it off.
Is it compliant with CDM 2015 and HSE guidance?+
Templates are structured around the Construction (Design and Management) Regulations 2015 and reference relevant HSE guidance. They’re a strong starting point, not legal advice — you’re responsible for checking the content is suitable and sufficient for your specific site and work.
Who writes the content — is it just AI?+
AI drafts the document from a structured template; a competent person (you) reviews, adjusts and approves it before it’s used. The templates are built from recognised hazards and control measures for each task, not generated from scratch each time.
I’m a sole trader — is this overkill?+
No. Sole traders are exactly who get caught out when a principal contractor asks for RAMS before a Monday start. The free plan covers a few documents a month with no card required.
Do you cover my trade?+
The launch library covers the common UK construction trades and high-risk tasks — work at height, electrical, groundworks, lifting, hot works, COSHH, demolition, finishing trades and general site work. If your task isn’t there yet, tell us and we’ll prioritise it.
What does early access get me?+
A free account at launch, founder-led setup help, and a say in what we build next. We’re a small UK team building this with trades, not at them.