1
Scope of works
This RAMS covers solvents & paints carried out by finishing operatives on a UK construction or maintenance site. It sets out the method, the principal hazards and the control measures to be applied. Site-specific details (address, client, access, dates and supervisor) are completed for each job before the document is issued for principal-contractor review.
2
Sequence of works
- 1Review safety data sheets and complete the COSHH assessment
- 2Set up controls (LEV, suppression, ventilation) before work
- 3Carry out the task using RPE and PPE as assessed
- 4Decontaminate and store/dispose of substances correctly
- 5Maintain health surveillance records where required
3
Hazards, risk rating & controls
Risk = likelihood × severity (1–25). Initial is before controls; residual is with controls applied.
Exposure to hazardous dust / substances
Initial16→Residual6
Who’s at risk: Operatives, Other trades
- › COSHH assessment completed; safer product substituted where possible
- › Water suppression / on-tool extraction (LEV) to control dust at source
- › RPE to the correct protection factor; face-fit tested
Skin contact / dermatitis and burns
Initial9→Residual2
Who’s at risk: Operatives
- › Chemical-resistant gloves and barrier cream; skin checks
- › Decontamination and welfare facilities available
- › Spill kit and safety data sheets on site
Manual handling of materials and equipment
Initial9→Residual3
Who’s at risk: Operatives
- › Mechanical handling/aids used where reasonably practicable
- › Loads assessed; team lifts for awkward or heavy items
- › Operatives briefed on safe lifting technique
Slips, trips and falls on the level
Initial6→Residual2
Who’s at risk: Operatives, Other trades
- › Work area kept clear; good housekeeping enforced
- › Cables and hoses routed away from walkways
- › Spillages cleaned immediately; adequate lighting maintained
4
PPE
- ✓ RPE (face-fit tested)
- ✓ Chemical-resistant gloves
- ✓ Coveralls
- ✓ Eye protection
- ✓ Safety boots
5
Competence
- ✓ COSHH awareness
- ✓ Face-fit tested for RPE
- ✓ LEV use and checks
Schemes (CSCS, PASMA, IPAF…) evidence competence; they are not statutory requirements in themselves.
6
Permits & legislation
Permit for high-risk substances where required
COSHH 2002Control of Lead at Work 2002 (where relevant)CDM 2015HSE WIS guidance
This is a draft, not a finished RAMS. The content above is a starting point generated from recognised hazards and controls for this task. A competent person must review it and confirm it is suitable and sufficient for the specific site before use. It is not legal advice or a guarantee of acceptance.